The comfort of a bean bag depends a great deal on its filling. At LiveDeco these are not anonymous beads: we make them in our factory in France, in the Rhône-Alpes region, in high-density polystyrene, classified M1 fire-retardant. They are also described as recyclable.
This text explains what those beads are, how to refill a bean bag you already have at home, and which refills exist. It does not replace How to buy a giant bean bag: what to look for when you are choosing a size.
M1 beads, made in our factory
The 10 L New Polystyrene Bead Refill, M1 FIRE-RESISTANT Certified, for BiG52 Giant Bean Bag page reminds you: these beads are designed for our bean bags, tested, and they have an M1 classification report issued by the national laboratory LNE. The 10 L bag is sold at €29.90. It is not the only volume, but it is the one that carries the certification wording most clearly in the product title.
On the bean bags themselves, the page states the same filling: polystyrene beads, M1 standard, an inner cover that holds them. The living-room models we sell arrive already filled. On those pages, then, there is no empty cover to fill in the middle of the living room on delivery day.
How to refill a bean bag
Over time, a seat can sag. You then do not need a new bean bag: you open the cover, reach the inner cover, and add beads. Photos of our models show the zip of the outer cover, for example on a Classic or on a pear. Work over a sheet, so beads do not roll onto the floor, and close both covers carefully.
We do not give a single volume here that would apply to every bean bag: a 45 cm cube, a kids’ pear and a 150 cm TiTAN do not have the same need. Add a little filling, test the seat again, and stop when the bean bag has a good hold once more.
The beads compact a little with use, especially on a bean bag that is used a lot in the living room. That is not a fabric defect: the filling settles, as in many soft seats. A small refill is often enough to bring back the original plumpness. Conversely, overfilling makes the seat too firm and less enveloping, particularly on a pear.
Preferably use our refills, designed for the same bean bags, classified M1 and made in the same factory. Mixing in beads of unknown origin means losing track of what we state on the product pages.
The refills available
The Bean Bag Refill collection currently offers refills of 5 L (€13.90), 10 L (€29.90), 50 L (€32.90), 100 L (€39.90), 200 L (€45.90), 250 L (€49.99), 400 L (€79.90) and 500 L (€96.90). The 5 L refill is also presented for a cushion, a giant bean bag or a pear bean bag. Choose the volume according to what you need to top up, not according to a general figure found elsewhere.
If you are only changing the fabric, a replacement cover is sometimes enough, for example in Covers or Classic XXL Bean Bag Cover. The empty Classic cover does not require extra beads or a new inner cover: it goes over the bean bag that is already filled.
Keep the refill bag well closed until you use it, and pour the beads in gradually. A large volume (200 L, 400 L or 500 L) is mainly useful when several bean bags, or a very large size, need topping up. For a slight sag on a pear or a cube, a smaller refill is usually enough. In every case, the product page and the state of the seat remain the best guide, rather than a single figure heard elsewhere.
The beads are not washed, and they are not mixed with another filling. If you remove the outer cover for cleaning, leave the inner cover closed. It is what holds the filling while the outer fabric is cared for, according to the model’s instructions.
The origin of the beads is part of the product information, not a side note. They come from the same French factory as many of our bean bags, with a traceable M1 classification. When you refill, you are therefore continuing the same kind of filling, rather than mixing the bean bag with a random material that is not provided for on the product page.
A refill is care for the bean bag you already have, not a new product in its place. It extends the use of the cover, the seams and the model you have already chosen, and so remains part of the same seat.
Shipping is free to 20 countries, except Corsica. A return is possible within 30 days if the item has not been used and you include photos.
Frequently asked questions about filling
What are LiveDeco bean bags filled with?
With high-density polystyrene beads, to the M1 fire-retardant standard. They are made in our factory in France (Rhône-Alpes), and are described as recyclable.
What does the M1 standard mean?
The beads have an M1 fire-reaction classification report issued by the national laboratory LNE. It is a fire-reaction classification, stated on the product pages and on the refills.
Is the bean bag delivered already filled?
The models presented in our bean bag collections are filled, with an inner cover that holds the beads. Do still check the page of the product you choose.
When should I top up the beads?
When the seat sags over time. You then add a refill, without replacing the whole bean bag. The quantity depends on the state of the seat and on the model: follow the product page rather than a single volume.
Which refills do you offer?
The Bean Bag Refill collection offers, among others, 5 L (€13.90), 10 L (€29.90, M1-certified), 50 L, 100 L, 200 L, 250 L, 400 L and 500 L.
Shipping and returns?
Shipping is free to 20 countries, except Corsica. A return is possible within 30 days if the item has not been used and you include photos.









